This POF finishing tool was tailored for the professional installer, giving them a single tool that can perform all the steps of installation. It terminates fiber without polishing and strips the POF cable jacket to the proper length with consistent results. Termination is done by clamping the POF cable into place in the tool, and squeezing.
A precise, round razor blade cuts the cable with a scissor-like action without damaging the fiber. Damage to the fiber is common in this process when a normal razor blade is used, as the exit cut chips the fiber and cladding. With the FiberFin termination system, average attenuation loss is between 1.0 and 1.5 dB.
The special blade used in the FiberFin POF Finishing "All In One" Tool is mounted on a gear assembly that rotates the blade after each cut, allowing the blade to wear evenly and give consistent termination results. Users must keep track of the blade wear. Once it becomes dull, the cutting head can be replaced.
With the cutting system fully enclosed, this tool is both safe and user-friendly.
• Terminates and finishes simplex 2.2mm outer diameter POF cable
• Strips jacket of POF cable to user-adjustable length between 4 and 20 mm
• Uses rounded blade to strip jacket without damaging fiber
• Safe, easy-to-use design
• Rough cut blade
• Tool has burnished body, two-component handles
RENNSTEIG WERKZEUGE, ISO 9001:2008 certified company.
Made in Germany
Reference part number: 8000 0003 3
OEM Description: Tool for cutting polymeric optical fibers Ø 1.8, 2.2 and 2.3
More information on this product is available directly from the OEM here.