This POF finishing tool was tailored for the professional installer, giving them a single tool that can perform all the steps of installation. It terminates fiber without polishing and is completed by clamping the POF cable into place in the tool, and squeezing.
A precise, round razor blade cuts the cable with a scissor-like action without damaging the fiber. Damage to the fiber is common in this process when a normal razor blade is used, as the exit cut chips the fiber and cladding. With the FiberFin termination system, average attenuation loss is between 1.0 and 1.5 dB.
With the automatic indexing replacement head (FF-STD2-RPHD), the special blade used in the FiberFin POF Finishing “All In One” Tool is mounted on a gear assembly that rotates the blade after each cut, allowing the blade to wear evenly and give consistent termination results. After 2,500 cuts, the assembly will lock the tool open and prevent usage until the cutting head is replaced, ensuring that every cut performed is of the highest quality.
Once the blade becomes dull, the cutting head can easily be replaced. With the cutting system fully enclosed, this tool is both safe and user-friendly.
• Terminates and finishes simplex 1.8, 2.2, and 2.3mm outer diameter POF cable
• Automatic blade advance and final stop (FF-STD2-RPHD) or
• Manual blade advance (FF-STD1-RPHD)
• Rough cut blade
August 2017 Product Update
As of August 2017, the line of STD-2 hand tools features a newly designed cutting head. In addition to improved safety features, the blade now lasts for 2,500 cuts, or twice as long as the old blade. As a result, the prices for STD-2 tools and kits that use this part have undergone a slight increase. See the product update information document for more information.
RENNSTEIG WERKZEUGE, ISO 9001:2008 certified company.
Made in Germany
Reference part number: 8001 0001 3
More information on this product is available from the OEM here.